MSD Blaster 2 Coils PN 8202
$41.00
Stock Applications The following Blaster 2 Coils are supplied with a 0.8 ohm ballast resistor and a terminal and boot to fit most applications. The ballast resistor must be used with stock Points
Ignition and Mallory Unilite applications. NOTE: These are the same coils as the other Blaster Coils, except they are supplied with a ballast resistor.
|
MSD Blaster 2 Coils PN 8203
$45.00
Includes ballast resistor for points
|
MSD HEI Module PN 8364
$84.50
|
MSD Module Kits
$44.95
Pick the rpm range you need affter you add to cart. The MSD RPM Module Kits and RPM Module Selectors give you a full selection of RPM values to choose from. The individual modules and Module
Selectors plug into the MSD MC-2, Shift Light , RPM Activated Switch and the Two or Three Step Module Selectors.
|
MSD Module Selectors 8739
$89.70
The MSD Two Step Module Selectors permit the user to switch between multiple RPM or retard modules when connected to an MSD MC-2 Ignition or Multi-Step Retard. With this selection capability these
devices can be used to perform a variety of functions. Example: When the Two Step is connected to the built-in rev control on the MC Ignition, the driver is able to limit the rpm precisely while
staged and waiting for the green light. By simply pressing a switch the Module Selector will automatically switch to the lower RPM module limiting the rpm at that chosen point. When the starting
light turns green and the switch is released, the Module Selector will switch back to the higher RPM limit.
|
Blaster High Vibration Coil PN 8222
$49.70
For circle track, off road and other severe duty racing applications, this is the coil! The windings of the High Vibration Coil are completely encased in a premium epoxy making it impossible for
vibration to affect the windings. This assembly is housed in a unique alkyd molded shell which provides high dielectric characteristics plus a very durable shell. Brass primary terminals ensure
full voltage delivery and are spaced far apart to eliminate the chance of spark arc-over. The High Vibration Coil can be mounted in any position and can be used with a standard canister coil
mount.
|
